Jan. 13, 2011 – DYMAX Corporation has released a new adhesive featuring a built-in cure indicator. 3225-T-SC is a versatile, plastic-bonding adhesive formulated with DYMAX’s patented See-Cure technology. This material is designed for rapid bonding, laminating, and sealing of most plastics such as PMMA (acrylic), PC, PVC, ABS, PA, PU, SAN, TPU, and aluminum. It can also be considered for bonding glass, stainless steel, and brass substrates in combination with plastic substrates.
Jan. 13, 2011 – DYMAX Corporation has released a new adhesive featuring a built-in cure indicator. 3225-T-SC is a versatile, plastic-bonding adhesive formulated with DYMAX’s patented See-Cure technology. This material is designed for rapid bonding, laminating, and sealing of most plastics such as PMMA (acrylic), PC, PVC, ABS, PA, PU, SAN, TPU, and aluminum. It can also be considered for bonding glass, stainless steel, and brass substrates in combination with plastic substrates.
 |
|
3225-T-SC is formulated to cure with DYMAX broad-spectrum curing equipment such as the BlueWave 200 Spot Lamps, 5000-EC Flood Lamp(s)/UVCS Conveyor Systems, and the narrow-spectrum BlueWave LED Prime UVA Spot Lamp.
3225-T-SC is coloured bright blue in the uncured state. The adhesive’s high visibility enables automated vision systems to confirm adhesive placement prior to the cure. During the curing process, the blue colour of the adhesive transitions to clear, and provides an obvious, visual confirmation that a full cure has been achieved. 3225-T-SC is designed to cure tack free and clear in appearance after exposure to DYMAX broad-spectrum curing equipment in <4 seconds at 200 mW/cm2 at 385 nm and in <3 seconds with the DYMAX BlueWave LED Prime UVA system.
For more information, please visit www.dymax.com.
Print this page
Leave a Reply